86D-Link DAP-1350 User Manual
Section 3 - Configuration
SPI (Stateful Packet Inspection, also known as
dynamic packet filtering) helps to prevent cyber
attacks by tracking more state per session. It
validates that the traffic passing through the
session conforms to the protocol.
Select one of the following for TCP and UDP
ports:
Endpoint Independent - Any incoming traffic
sent to an open port will be forwarded to the
application that opened the port. The port will
close if idle for 5 minutes.
Address Restricted - Incoming traffic must match
the IP address of the outgoing connection.
Address + Port Restriction - Incoming traffic
must match the IP address and port of the
outgoing connection.
Enable SPI:
NAT Endpoint
Filtering:
Firewall Settings
A firewall protects your network from the outside world. The D-Link DAP-1350 offers a firewall type functionality. The
SPI feature helps prevent cyber attacks. Sometimes you may want a computer exposed to the outside world for certain
types of applications. If you choose to expose a computer, you can enable DMZ. DMZ is short for Demilitarized Zone.
This option will expose the chosen computer completely to the outside world.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
