20D-Link DAP-2360 User Manual
Section 3 - Conguration
Disable or select a Captive Portal prole for Primary SSID.
Enter the MAC addresses of the APs on your network that will serve as bridges to wirelessly connect multiple networks.
Click on the Scan button to search for available wireless networks, then click on the available network that you want to connect with.
Use the drop-down menu to choose Open System, Shared Key, or WPA-Personal.
Select Open System to communicate the key across the network.
Select Shared Key to limit communication to only those devices that share the same WEP settings. If multi-SSID is enabled, this
option is not available.
Select WPA-Personal to secure your network using a password and dynamic key changes. No RADIUS server is required.
Captive Prole:
Remote AP MAC
Address:
Site Survey:
Authentication:
To Next Page
Loading...
