D-Link DAP-2360

84D-Link DAP-2360 User Manual
Section 3 - Conguration
Time and Date
Displays the current time and date settings.
Check to enable the AP to get system time from
an NTP server.
Enter the NTP server URL or IP address.
Use the drop-down menu to select your correct
Time Zone.
Check the box to Enable Daylight Saving Time.
Use the drop-down menu to select the correct
Daylight Saving oset.
You can either manually set the time for your AP
here, or you can click the Copy Your Computer’s
Time Settings button to copy the time from
the computer you are using (Make sure that the
computer’s time is set correctly).
Current Time:
Enable NTP
Server:
NTP Server:
Time Zone:
Enable Daylight
Saving:
Daylight Saving
Dates:
Set the Date
and Time
Manually: