50D-Link DAP-2360 User Manual
Section 3 - Conguration
Captive Portal
Authentication Settings - Passcode
The Captive Portal is a built-in web authentication server. When a station connects to an AP, the web brower will be redirected to a web authentication
page. In this windows, user can view and congure the Captive Portal settings. Click the Add button to add a new entry. Click the Delete or Delete
All button to remove a specic entry or all the entries congured.
Select the captive portal encryption type here.
Options to choose from are Passcode, Username/
Password, Remote RADIUS, LDAP and POP3. In
this section we’ll discuss the Passcode option.
Enter the number of Passcode that will be used
here.
Enter the duration value, in hours, for this
Passcode.
Select the last active date for this Passcode here.
Year, Month and Day selections can be made.
Enter the maximum amount of users that can
use this Passcode at the same time.
Encryption
Type:
Passcode
Quantity:
Duration:
Last Active Day:
User Limit:
To Next Page
Loading...
