D-Link DAP-2360

82D-Link DAP-2360 User Manual
Section 3 - Conguration
Firmware and SSL Certication Upload
The current firmware version is displayed
above the le location eld. After downloading
the most recent version of firmware for the
DAP-2360 from http://support.dlink.com to your
local computer, use the Browse button to locate
the rmware le on your computer. Click Upload
to update the rmware version. Please don’t turn
the power o while upgrading.
You may load a language pack to display the
utility in another language. Click Browse to
locate the language pack file on your local
computer. After selecting and opening the
file, click Upload to upload the file to the
DAP-2360.
Click Browse to locate the SSL Certication le on
your local computer. After selecting and opening
the le, click Upload to upload the le to the
DAP-2360.
Upload
Firmware From
Local Hard Drive:
Language Pack
Upgrade:
Upload SSL
Certication
From Local Hard
Drive:
This page allows the user to perform a rmware upgrade. A Firmware upgrade is a function that upgrade the running software
used by the access point. This is a useful feature that prevents future bugs and allows for new features to be added to this
product. Please go to your local D-Link website to see if there is a newer version rmware available.