D-Link DAP-2360

32D-Link DAP-2360 User Manual
Section 3 - Conguration
Wireless Resource
The Wireless Resource Control window is used to congure the wireless connection settings so that the device can detect the
better wireless connection in your environment.
Select 2.4GHz.
Select Enable or Disable. This is an option for load
balancing. This determines whether to limit the
number of users accessing this device. The exact
number is entered in the User Limit eld below. This
feature allows the user to share the wireless network
trac and the client using multiple APs. If this
function is enabled and when the number of users
exceeds this value, or the network utilization of this
AP exceeds the percentage that has been specied,
the DAP-2360 will not allow clients to associate with
the AP.
Set the maximum amount of users that are allowed
access (zero to 64 users) to the device using the
specied wireless band. The default setting is 20.
Use the drop-down menu to Enable the 11n
Preferred function. The wireless clients with 802.11n
protocol will have higher priority to connect to the
device.
Wireless
band:
Connection
Limit:
User Limit:
11n
Preferred: