D-Link DCS-2330L

56D-Link DCS-2330L User Manual
Section 3: Conguration
HTTPS
This page allows you to install and activate an HTTPS certicate for secure access to your camera. After making any changes, click the Save Settings
button to save your changes.
Enable
HTTPS Secure
Connection:
Create Certicate
Method:
Status:
Note:
Enable the HTTPS service.
Choose the way the certicate should be created.
Three options are available:
Create a self-signed certicate automatically
Create a self-signed certicate manually
Create a certicate request and install
Displays the status of the certicate.
The certicate cannot be removed while the HTTPS
is still enabled. To remove the certicate, you must
rst uncheck Enable HTTPS secure connection.