D-Link DCS-942L - Page 29

29D-Link DCS-942L User Manual
Section 3 - Conguration
Enable:
Only During:
Snapshot Type:
Target:
Check this box to enable the Snapshot function.
Check this box to setup a scheduled timeframe when notications should be
sent. This is useful if you do not want to be notied when it would otherwise be
inconvenient, such as during the night or on weekends.
Select whether to take a single snapshot or to take 6 snapshots with a 1 second
interval between them.
Select where you want the snapshot to be sent. It may be uploaded to an FTP or
sent to an e-mail address. You will need to have all of the necessary information
lled out in order to use either of these features.
Click Next to continue.
Snapshot Notications is a feature to send image snapshots via FTP or e-mail when a trigger is
activated. This step will only set up notications to be sent with still images that are captured.
If you would like to have notications with video, please leave this disabled and continue to
the next step.