31D-Link DCS-942L User Manual
Section 3 - Conguration
Enable:
Only During:
SD Recording
Type:
Keep Free Space:
Cyclic
Check this box to enable the SD Recording function.
Check this box to setup a scheduled timeframe when recording should take
place. This is useful if you do not want to be recorded when it would otherwise
be inconvenient, such as during the night or on weekends.
The SD Recording Wizard uses Prole 2 by default. More information about video
proles can be found in “Audio and Video” on page 37. You can set the le type
from the drop down menu. You can also specify how many seconds before and
after the event should be recorded, as well as how long the maximum duration
of the video clip should be in minutes.
Set amount of space to keep free on the microSD card.
When this option is selected, it will cause the oldest snapshot/video les to be
deleted when the system requires storage space for new snapshot/video les.
Click Next to continue.
SD Recording Notications is a feature to record video to the microSD card when a trigger
is activated. The microSD card must be formatted for use with the camera prior to running
the wizard. This can be done by using the format option found under SD Management. For
more details, please refer to “SD Management” on page 47.
A summary of the options you selected is displayed for conrmation. If you are happy with
the selected conguration, click Apply. Otherwise, click Back to make the required changes.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
