D-Link DGS-1210-08P - VLAN > Voice VLAN > Voice VLAN Port Settings

Configuration D-Link Web Smart Switch User Manual
3
3
5
5
Select the OUI and press Add to the lower table to complete the Auto Voice VLAN setting.
NOTE: Voice VLAN has higher priority than any
other features (including QoS). Therefore the
voice traffic will be operated according to the
Voice VLAN setting and not impacted by the QoS
feature.
NOTE:
It is recommended setting the highest
priority for Voice VLAN to guarantee the quality of
VoIP traffic.
VLAN > Voice VLAN > Voice VLAN Port Settings
The Voice VLAN Port Settings page allows users to automatically place the voice traffic from IP phone to an
assigned VLAN to enhance the VoIP service. With a higher priority and individual VLAN, the quality and the
security of VoIP traffic are guaranteed.
Figure 4.33 – VLAN > Voice VLAN > Voice VLAN Port Settings
From Port / To Port: A consecutive group of ports may be configured starting with the selected port.
Auto Detection: Switch will add ports to the voice VLAN automatically if it detects the device OUI matches
the Telephony OUI configured in Voice VLAN OUI Setting page. Use the drop-down menu to enable or
disable the OUI auto detection function. The default is Disabled
Tagged / Untagged: tagged or untagged the ports.
Click Apply to implement the changes made. Click Refresh to renew the table.
NOTE: Voice VLAN has higher priority than any
other features even QoS. Therefore the voice
traffic will be operated according to Voice VLAN
setting and not impacted by QoS feature.