Configuration D-Link Web Smart Switch User Manual
3
3
6
6
NOTE:
It is recommended setting the highest
priority for Voice VLAN to guarantee the quality of
VoIP traffic.
VLAN > Voice VLAN > Voice Device List
The Voice Device List page displays the information of Voice VLAN.
Figure 4.34 – VLAN > Voice VLAN > Voice Device List
Select a port or all ports and click Search to display the Voice Device information in the table.
VLAN > Auto Surveillance VLAN
Similar as Voice VLAN, Auto Surveillance VLAN is a feature that allows you to automatically place the video
traffic from D-Link IP cameras to an assigned VLAN to enhance the IP surveillance service. With a higher
priority and individual VLAN, the quality and the security of surveillance traffic are guaranteed. The Auto
Surveillance VLAN function will check the source MAC address on the incoming packets. If it matches
specified MAC address, the packets will pass through switch with desired priority.
Figure 4.35 – VLAN > Auto Surveillance VLAN
Auto Surveillance VLAN Global Settings:
Auto Surveillance VLAN: Select to enable or disable Auto Surveillance VLAN. The default is Disabled.
VLAN ID: By default, the VLAN ID 4094 was created as auto surveillance VLAN. You also can create
another Auto Surveillance VLAN after Enabled is selected in Auto Surveillance VLAN.
To Next Page
Loading...
