D-Link DGS-1210-08P - L2 Functions > LLDP > LLDP Management Address Table

Configuration D-Link Web Smart Switch User Manual
5
5
5
5
Figure 4.60 – L2 Functions > LLDP > LLDP Management Address Settings
From Port / To Port: A consecutive group of ports may be configured starting with the selected port.
Address Type: Select the IP address type here. Options to choose from are IPv4 and IPv6.
Address: Enter the management IPv4 or IPv6 address.
Port State: Specify whether the Port State is enabled on the port.
Click Apply to implement the changes made.
L2 Functions > LLDP > LLDP Management Address Table
The LLDP Management Address Table page displays the detailed management address information for the
entry.
Figure 4.61 – L2 Functions > LLDP > LLDP Management Address Table
Management Address: Select IPv4 or IPv6, from the drop-down menu, and enter the IPv4 or IPv6 address
in the textbox. Click Search and the table will update and display the values required.
Subtype: Displays the managed address subtype. For example, MAC address or IPv4 address.
Management Address: Displays the IP address.
IF Type: Displays the IF Type.
OID: Displays the SNMP OID.
Advertising Ports: Displays the advertising ports.