Configuration D-Link Web Smart Switch User Manual
8
8
9
9
To define the IPv6 ACL UDP profile, Select IPv6 ACL with UDP and click Select button. The following
window displays:
Figure 5.92 – ACL > Access Profile List > Add ACL Profile (IPv4 ACL UDP)
The Add ACL Profile IPv4 ACL UDP port window contains the following fields:
IPv6 Class: Tick this option to include the IPv6 class field.
Source IP Mask: Defines the range of source IPv6 addresses, relevant to the ACL rules. (0=ignore,
1=check).
Destination IP Mask: Defines the range of destination IPv6 addresses, relevant to the ACL rules. (0=ignore,
1=check).
Source Port Mask: Defines the range of source Ports relevant to the ACL rules. (0=ignore, 1=check). For
example, to set 0 – 15, set mask of FFF0.
Destination Port Mask: Defines the range of destination IP addresses, relevant to the ACL rules. (0=ignore,
1=check). For example, to set 0 – 15, set mask of FFF0.
Click Add button to add the ACL profile. Click Back to go back to the previous window.
NOTE: A combination of one or several filtering
masks can be selected simultaneously. The
window updates with the relevant field(s).
2) Selecting the field of interest will display the related columns in the lower part of the page. Enter the
filtering mask and click Apply when done. A filtering mask is to specify the digit that you want to check. For
example, if you want to check a network of 192.168.1.0/24, then you should enter the IP mask as
255.255.255.0.
To Next Page
Loading...
