30
Figure 23. Statistic
For detailed packet information, click on the ID parameter as
shown in Figure 24.
Figure 24.
System Setting
The System Setting includes the System name, Location name,
Login Timeout, IP Address, Subnet Mask, and Gateway. Through
the Web Management Utility, you can easily recognize the device
by using the System Name and the Location Name.
The Login Timeout is used to set the idle time-out for security
issues. When there is no action on the Web Smart Utility and the
utility times out, you must re-login to the Web Smart Utility
before you are able to change any system settings.
Enter the IP Address, Subnet Mask, and Gateway for the device.
To Next Page
Loading...
Need help?
General