D-Link DGS-3120-24TC - Ipv6 Limited Multicast Range Settings

xStack® DGS-3120 Series Managed Switch Web UI Reference Guide
117
Figure 4–80 Multicast Address Group List Settings window
The fields that can be configured are described below:
Parameter Description
Profile ID
Display the profile ID.
Profile Name
Display the profile name.
Multicast Address List
Enter the multicast address list here.
Click the Add button to add a new entry based on the information entered.
Click the <<Back button to discard the changes made and return to the previous page.
Click the Edit button to re-configure the specific entry.
Click the Delete button to remove the specific entry.
IPv6 Limited Multicast Range Settings
Users can configure the ports and VLANs on the Switch that will be involved in the Limited IPv6 Multicast Range.
To view the following window, click L2 Features > Multicast Filtering > IPv6 Multicast Filtering > IPv6 Limited
Multicast Range Settings, as show below:
Figure 4–81 IPv6 Limited Multicast Range Settings window
The fields that can be configured are described below:
Parameter Description
Ports/VID List
Select the appropriate port(s) or VLAN IDs used for the configuration here.
Access
Assign access permissions to the ports selected. Options listed are Permit and Deny.
Profile ID/Profile
Name
Use the drop-down menu to select the profile ID or profile name used and then assign
Permit or Deny access to them.
Click the Apply button to accept the changes made.