xStack® DGS-3120 Series Managed Switch Web UI Reference Guide
307
Use the drop-down menu to select a unit for uploading the firmware.
Enter the TFTP server IP address used.
Click the radio button to enter the TFTP server IP address used.
Click the radio button to enter the TFTP server IPv6 address
Enter the location and name of the Destination File.
Enter the location and name of the Source File.
Click Upload to initiate the upload.
Download Configuration
The following window is used to download the configuration file for the Switch.
Download Configuration From TFTP
This page allows the user to download the configuration file from a TFTP Server to the Switch and updates the
switch.
Figure 12–10 Download Configuration – TFTP window (SI Mode Only)
Figure 12–11 Download Configuration – TFTP window (EI Mode Only)
The fields that can be configured are described below:
Parameter Description
Unit Use the drop-down menu to select a unit for receiving the configuration file. Select All for
Enter the TFTP server IP address used.
Click the radio button to enter the TFTP server IP address used.
Click the radio button to enter the TFTP server IPv6 address
To Next Page
Loading...
