D-Link DGS-3120-24TC - CFM Fault Table

xStack® DGS-3120 Series Managed Switch Web UI Reference Guide
275
Figure 10–14 CFM Packet Counter Window
The fields that can be configured are described below:
Parameter Description
Port List
Which ports’ counter to show. If not specified, all ports will be shown.
All Ports
Select this option to include all the port in this configuration.
Type Transmit – Selecting this option will display all the CFM packets transmitted.
Receive – Selecting this option will display all the CFM packets received.
CCM – Selecting this option will display all the CFM packets transmitted and received.
Click the Find button to locate a specific entry based on the information entered.
Click the Clear button to clear all the information entered in the fields.
CFM Fault Table
To view this window, click OAM > CFM > CFM Fault Table, as shown below:
Figure 10–15 CFM Fault Table Window
The fields that can be configured are described below:
Parameter Description
MD Name
Select and enter the Maintenance Domain name used.
MD Index
Select and enter the Maintenance Domain index used.
MA Name
Select and enter the Maintenance Association name used.
MA Index
Select and enter the Maintenance Association index used.
Click the Find button to locate a specific entry based on the information entered.