xStack® DGS-3120 Series Managed Switch Web UI Reference Guide
272
Figure 10–10 CFM Port Settings Window
The fields that can be configured are described below:
Parameter Description
Specifies the unit’s ID used.
Here the user can select the port range used for this configuration.
State
Here the user can enable or disable the state of specific port regarding the CFM
Click the Apply button to accept the changes made.
CFM MIPCCM Table
To view this window, click OAM > CFM > CFM MIPCCM Table, as shown below:
Figure 10–11 CFM MIPCCM Table Window
CFM Loopback Settings
To view this window, click OAM > CFM > CFM Loopback Settings, as shown below:
To Next Page
Loading...
