xStack® DGS-3120 Series Managed Switch Web UI Reference Guide
306
Figure 12–7 Download Firmware – HTTP window
The fields that can be configured are described below:
Parameter Description
Unit Use the drop-down menu to select a unit for receiving the firmware. Select All for all
Enter the location of the Destination File.
Source File Enter the location of the Source File or click the Browse button to navigate to the
firmware file for the download.
Click Download to initiate the download.
Upload Firmware
The following window is used to upload firmware from the Switch.
Upload Firmware To TFTP
This page allows the user to upload firmware from the Switch to a TFTP Server.
Figure 12–8 Upload Firmware – TFTP window (SI Mode Only)
Figure 12–9 Upload Firmware – TFTP window (EI Mode Only)
The fields that can be configured are described below:
Parameter Description
To Next Page
Loading...
