D-Link DGS-3120-24TC - Egress Access Profile List (EI Mode Only); Add an Ethernet ACL Profile

xStack® DGS-3120 Series Managed Switch Web UI Reference Guide
183
Figure 7–47 ACL Flow meter Display window
Click the <<Back button to return to the previous page.
Egress Access Profile List (EI Mode Only)
Egress ACL performs per-flow processing of packets when they egress the Switch. The Switch supports three
Profile Types, Ethernet ACL, IPv4 ACL, and IPv6 ACL.
To view this window, click ACL > Egress Access Profile List as shown below:
Add an Ethernet ACL Profile
The window shown below is the Add Egress ACL Profile window for Ethernet. To use specific filtering masks in this
egress ACL profile, click the packet filtering mask field to highlight it red. This will add more filed to the mask.
After clicking the Add ACL Profile button, the following page will appear:
Figure 7–48 Add Egress ACL Profile window (Ethernet ACL)
The fields that can be configured are described below:
Parameter Description
Profile ID
Enter a unique identifier number for this profile set. This value can be set from 1 to 4.