xStack® DGS-3120 Series Managed Switch Web UI Reference Guide
276
CFM MP Table
To view this window, click OAM > CFM > CFM MP Table, as shown below:
Figure 10–16 CFM MP Table Window
The fields that can be configured are described below:
Parameter Description
Here the user can select the unit ID and the port number to view.
Here the user can enter the level to view.
Direction
Here the user can enter the direction to view.
Inward - Inward facing (up) MP.
Outward - Outward facing (down) MP.
Here the user can enter the VID to view.
Click the Find button to locate a specific entry based on the information entered.
Ethernet OAM
Ethernet OAM Settings
This window is used to configure the Ethernet OAM settings.
To view this window, click OAM > Ethernet OAM > Ethernet OAM Settings, as shown below:
To Next Page
Loading...
