D-Link DGS-3120-24TC - Upload Configuration to HTTP

xStack® DGS-3120 Series Managed Switch Web UI Reference Guide
309
Figure 12–14 Upload Configuration – TFTP window (EI Mode Only)
The fields that can be configured are described below:
Parameter Description
Unit
Use the drop-down menu to select a unit for uploading the configuration file.
TFTP Server IP
Enter the TFTP server IP address used.
IPv4
Click the radio button to enter the TFTP server IP address used.
IPv6 (EI Mode
Only)
Click the radio button to enter the TFTP server IPv6 address
used.
Destination File
Enter the location and name of the Destination File.
Source File
Enter the location and name of the Source File.
Filter Use the drop-down menu to include, begin or exclude a filter like SNMP, VLAN or STP.
Select the appropriate
Filter
action and enter the service name in the space provided.
Click Upload to initiate the upload.
Upload Configuration To HTTP
This page allows the user to upload the configuration file from the Switch to a computer.
Figure 12–15 Upload Configuration – HTTP window
The fields that can be configured are described below:
Parameter Description
Unit
Use the drop-down menu to select a unit for uploading the configuration file.
Source File
Enter the location and name of the Source File.
Click Upload to initiate the upload.