D-Link DPN-101G - System Log Management

36D-Link DPN-101G User Manual
Section 3 - Conguration
Choose Admin > System Log, the page shown in the following gure appears. This page is used to display the system event log table. By checking
Error or Notice (or both) will set the log ag.
The following table describes the parameters of this page:
System Log
Field Description
Log/Display Level
There have dierent level of log to be record
and display.
Mode
User can select Local or Remote. If select
Remote, user should also congure the IP
address and UDP port of the Log server.
Save Log to File Save the log le to local hard disk.
Clear Log Clean up the current Log on the device.