DSL-2600U ADSL/Ethernet Router with Wi-Fi
User Manual
Configuring via Web-based Interface
Parameter Description
Enable IGMP Multicast
Select the checkbox to allow multicast traffic from the external
network (e.g. video streaming) to be received.
NAT
Select the checkbox if you want one WAN IP address to be used for
all computers of your LAN.
Firewall
Select the checkbox to enable protection against ARP and DDoS
attacks.
Click the Next button to continue.
If needed, change the connection settings available in the VLAN section (the page is displayed for
the PPPoE type only).
Figure 28. Configuring PPPoE WAN connection.
Parameter Description
Allow to create several
connections assigned
to this port
Select the checkbox to allow the router to use several untagged
connections.
Use VLAN
Select the checkbox to allow the router to use tagged VLAN
connections.
VLAN ID
An identifier for the VLAN. The field is displayed when the Use
VLAN checkbox is selected.
VLAN priority
A priority tag for the type of traffic transmitted. The field is
displayed when the Use VLAN checkbox is selected.
Click the Next button to continue.
After that the page displaying all specified settings opens. Click the Save button to create the
connection or the Back button to specify other settings.
After clicking the Save button, the quick settings page opens.
Page 35 of 112
To Next Page
Loading...
Need help?
Power
Data Transfer Rates
