EasyManuals Logo

D-Link DSL-520B User Guide

D-Link DSL-520B
65 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #42 background imageLoading...
Page #42 background image
Section 3 – Configuration
Quality of Service
QoS or Quality of Service allows your Router to help prioritize the data packet flow in your Router and network. This is very important for time
sensitive applications such as VoIP where it may help prevent dropped calls. Large amounts of non-critical data can be scaled so as not to affect
these prioritized sensitive real-time programs.
To access the QoS – Queue Management Configuration window, click the Quality of Service link in the Advanced Setup directory.
This window allows you to set up QoS on the Router. When you are
finished, click on the Save/Apply button.
Queue Config
To add a new QoS Queue configuration, click the Queue Config link.
Click the Add button to add a new QoS Queue Configuration table entry.
This window allows you to configure a QoS queue entry and assign it a
specific network interface.
Click the Save/Apply button to save and activate the filter.
D-Link DSL-520B User Manual
41

Other manuals for D-Link DSL-520B

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the D-Link DSL-520B and is the answer not in the manual?

D-Link DSL-520B Specifications

Data Transfer Rates IconData Transfer Rates
G.dmt full rate downstreamup to 8 Mbps
G.dmt full rate upstreamup to 1 Mbps
G.lite downstreamup to 1.5 Mbps
G.lite upstreamup to 512 Kbps
G.dmt.bis full rate downstreamup to 12 Mbps
G.dmt.bis full rate upstreamup to 12 Mbps
ADSL full rate downstreamup to 24 Mbps
ADSL full rate upstreamup to 1 Mbps
Interfaces IconInterfaces
ADSL interfaceRJ-11 connector
LAN interfaceRJ-45 port
Ethernet10/100BASE-T

Related product manuals