D-Link DSR-1000N - System Traffic_Meter Configure

Unified Services Router CLI Reference Guide
98
7
use_default_servers
Specify w hether to use system default NTP servers.
Boolean choice
8
ntp_server1
Set NTP server#1.
String
9
ntp_server2
Set NTP server#2
String
10
ntp_year
Set year for the date
Year
11
ntp_month
Set month for the date
Month in the format MM(01-
12)
12
ntp_day
Set Day for the date
Day in the format DD(01-31)
13
ntp_hour
Set hour for the date
HH(00-23) using 24 hour
clock
14
ntp_minutes
Set minutes for the date
minute in the format MM(00-
59)
15
ntp_seconds
Set seconds for the date
Second in the format SS(00-
59)
16
ntp_sync_interval
Set seconds for the date
Unsigned integer
10.17 system traffic_meter configure
S.No
Command Name
Description
Type and Description
1
save
Save traffic meter configuration changes.
2
exit
Save traffic meter configuration changes and exit current mode.
3
cancel
Roll back traffic meter configuration changes.
4
enable
Enable/Disable the traffic meter status
Boolean choice
5
limit_type
Set traffic Limit Type 0(No limit), 1(Download only), 2(Both
Directions)
traffic meter types
6
monthly_limit
Set the monthly limit value of the traffic meter
Unsigned integer
7
increase_limit_enable
Enable/Disable status of increase limit of the traffic meter option
Boolean choice
8
increase_limit_by
Set the value to increase limit of the traffic meter
Unsigned integer
9
counter
set traffic counter as either specific time or restart counter now
traffic counter type
10
time_hour
set hours for restart time
HH(00-23) using 24 hour
clock
11
time_minute
set minutes for restart time
minute in the format MM(00-
59)
12
day_of_month
set day of month
Calendar day of month
13
send_email_report
Enable/Disable send email report
Boolean choice
14
block_type
Set block Traffic type 0(block all traffic) 1(block all traffic except
email)
block traffic type.
15
send_email_alert
Enable/Disable send email alert
Boolean choice