D-Link DSR-1000N - System Snmp Access Delete <Ltrowid; System Switch_Settings Power_Saving Configure; System Switch_Settings Jumbo_Frame Configure; System Time Configure

Unified Services Router CLI Reference Guide
97
4
cancel
Roll back snmp configuration changes.
5
agent
The IP address of the SNMP agent.
IP address AAA.BBB.CCC.DDD
w here each part is in the range
0-255
6
subnet_mask
The netw ork mask used to determine the list of allowed SNMP
managers. To allow any IP on the netw ork to manager the device
enter 255.255.255.0. For a specific host, enter 255.255.255.255. To
allow global access, enter 0.0.0.0.
IP address AAA.BBB.CCC.DDD
w here each part is in the range
0-255
7
accessType
SNMP trap port the trap messages w ill be sent to.
String
8
community
The community string to w hich the agent belongs. Most agents are
configured to listen for traps in the Public community
String
10.13 system snmp access delete <ltrowid>
S.No
Command Name
Description
Type and Description
1
<ltrowid>
snmp access configuration mode
Unsigned integer
10.14 system switch_settings power_saving
configure
S.No
Command Name
Description
Type and Description
1
save
Save pow erMode configuration changes.
2
exit
Save pow er mode configuration changes and exit current mode.
3
cancel
Roll back content Filtering ow er mode configuration changes.
4
link_status
Enable/Disable Link status
Boolean choice
5
cable_length
enable/disable Cable Length
Boolean choice
10.15 system switch_settings jumbo_frame
configure
S.No
Command Name
Description
Type and Description
1
save
Save jumbo frame configuration changes.
2
exit
Save jumbo frame configuration changes and exit current mode.
3
cancel
Roll back jumbo frame configuration changes.
4
jumbo_frame
Enable/Disable jumbo frame
Boolean choice
10.16 system time configure
S.No
Command Name
Description
Type and Description
1
save
Save time configuration changes.
2
exit
Save time configuration changes and current mode.
3
cancel
Roll back time configuration changes.
4
timezone
Timezone
Timezones
5
auto_daylight
Specify w hether system automatically adjusts for daylight
savings time
Boolean choice
6
configure_ntp_servers
Specify w hether to use ntpp servers or user will set date and
time
Boolean choice