D-Link DSR-1000N - Chapter 12. Configuration Commands under Branch VPN; Vpn L2 Tp Server Configure; Vpn Pptp Client Configure

Unified Services Router CLI Reference Guide
109
Chapter 12. Configuration commands
under branch VPN
12.1 vpn l2tp server configure
S.No
Command Name
Description
Type and Description
1
save
Save l2tp server configuration changes.
2
cancel
Roll back l2tp server configuration changes.
3
exit
Save l2tp server configuration changes and
exit current mode.
4
enable_v4
enable/disable L2TP server in IPv4 mode
only.
Boolean choice
5
enable_v6
enable/disable L2TP server in IPv4/IPv6
mode.
Boolean choice
6
Natenable
enable/disable L2TP NAT routing mode
Boolean choice
7
start_address
L2TP server starting IP address.
IP address AAA.BBB.CCC.DDD w here each part
is in the range 0-255
8
end_address
L2TP server ending IP address.
IP address AAA.BBB.CCC.DDD w here each part
is in the range 0-255
9
ipv6_prefix
L2TP server IPv6 Prefix
IP address AAA.BBB.CCC.DDD w here each part
is in the range 0-255
10
EnablePap
enable pap authentication
Boolean choice
11
EnableChap
enable chap authentication
Boolean choice
12
EnableMSChapChap
enable MSchap authentication
Boolean choice
13
MSChapv2Enable
enable MSChapv2Enable authentication
Boolean choice
14
l2tpSecretKeyEnable
L2TP Enanle secret key
Boolean choice
15
secretKey
L2TP secret Key
String
16
timeout
User Time Out
Unsigned integer
12.2 vpn pptp client configure
S.No
Command
Name
Description
Type and Description
1
save
Save pptp client configuration changes.
2
cancel
Roll back pptp client configuration changes.
3
exit
Save pptp client configuration changes and
exit current mode.
4
enable
enable/disable PPTP client.
Boolean choice
5
server_address
PPTP server IP address.
IP address AAA.BBB.CCC.DDD w here each part is
in the range 0-255
6
remote_netw ork
Remote Netw ork Address
IP address AAA.BBB.CCC.DDD w here each part is