D-Link DSR-1000N - RIP

Unified Services Router CLI Reference Guide
70
validity starts
minute in the format MM(00-
59)
34
second_key valid_from second
second in w hich md5 authentication key
validity starts
Second in the format SS(00-
59)
35
second_key valid_to month
month in which md5 authentication key
validity ends
Month in the format MM(01-12)
36
second_key valid_to day
day in which md5 authentication key
validity ends
Day in the format DD(01-31)
37
second_key valid_to year
year in which md5 authentication key
validity ends
Year
38
second_key valid_to hour
hour in w hich md5 authentication key
validity ends
HH(00-23) using 24 hour clock
39
second_key valid_to minute
minute in w hich md5 authentication key
validity ends
minute in the format MM(00-
59)
40
second_key valid_to second
second in w hich md5 authentication key
validity ends
Second in the format SS(00-
59)
8.52 net routing static ipv4 configure <ltname>
S.No
Command Name
Description
Type and Description
1
<ltname>
Add new static routes.
String
2
save
Save static route changes.
3
exit
Save static routes changes and exit
current mode.
4
cancel
Roll back route configuration changes.
5
destination_address
Set the destination IP.
IP address
AAA.BBB.CCC.DDD
w here each part is in the
range 0-255
6
subnet_mask
Set the subnet for this rule.
IP address
AAA.BBB.CCC.DDD
w here each part is in the
range 0-255
7
gatew ay_address
Set the gatew ay IP.
IP address
AAA.BBB.CCC.DDD
w here each part is in the
range 0-255
8
interface
Set the interface for which the rule
applies.
WAN interface type
9
metric
Set the metric for this route.
Unsigned integer
10
private_flag
Defines w hether the route can be shared
w ith other gatew ays when RIP is enabled
Boolean choice
11
active_flag
Defines w hether its an active route
Boolean choice
8.53 net routing static ipv6 configure <ltname>
S.No
Command Name
Description
Type and Description
1
<ltname>
Add new IPV6 static routes.
String
2
save
Save IPV6 static route changes.