D-Link DSR-1000N - OSPFv3; Profiles

Unified Services Router CLI Reference Guide
80
255
19
source_address_end
IP of the Source user
IP address AAA.BBB.CCC.DDD
w here each part is in the range 0-
255
20
destination_address_start
IP of the Destination user
IP address AAA.BBB.CCC.DDD
w here each part is in the range 0-
255
21
destination_address_end
IP of the Destiation user
IP address AAA.BBB.CCC.DDD
w here each part is in the range 0-
255
22
qos_priority
Firew all type of service
firew all type of service
23
w an_interface
WAN interface for Source NAT settings
WAN interface type
24
snat_address
IP of the SNAT Address
IP address AAA.BBB.CCC.DDD
w here each part is in the range 0-
255
25
dnat_port
The port number to use for DNAT, required if port
forwarding is enabled
Port number
26
port_forwarding_enable
enable/disable port forwarding based on this firewall
rule configuration settings
Boolean choice
27
internal_ip_address
Send to Local Server (DNAT IP),Specifies an IP
address and port number of a machine on the Local
Netw ork which is hosting the server.
IP address AAA.BBB.CCC.DDD
w here each part is in the range 0-
255
28
dnat_ipaddress
Set it as Dedicated/configured WAN
WAN interface type
9.16 security firewall ipv4 enable <ltrow_id>
S.No
Command Name
Description
Type and Description
1
<ltrow_id>
Firew all IPV4 rules configuration mode.
Unsigned integer
9.17 security firewall ipv4 disable <ltrow_id>
S.No
Command Name
Description
Type and Description
1
<ltrow_id>
Firew all IPV4 Rules configuration mode.
Unsigned integer
9.18 security firewall ipv4 delete <ltrow_id>
S.No
Command Name
Description
Type and Description
1
<ltrow_id>
Firew all IPV4 Rules configuration mode.
Unsigned integer
9.19 security firewall ipv4 move <ltrow_id>
S.No
Command
Name
Description
Type and Description
1
<ltrow_id>
Firew all IPV4 Rule reordering mode.
Row id(s) a,b,c w here each part is a valid row id
in the range [0-9]
2
save
Save Firew all IPV4 rule reordering changes.