D-Link DSR-1000N - System Logging Ipv6 Configure; System Remote_Management Https Configure

Unified Services Router CLI Reference Guide
94
53
syslog_server server_name7
name
Set Syslog server.
IP address AAA.BBB.CCC.DDD w here
each part is in the range 0-255
54
syslog_server server_name7
severity
Set Syslog severity.
syslog server severity types
55
syslog_server server_name7
facility
Set Syslog facility.
syslog server facility ID types
56
syslog_server server_name8
enable
Boolean Choice Y/N
Boolean choice
57
syslog_server server_name8
name
Set Syslog server.
IP address AAA.BBB.CCC.DDD w here
each part is in the range 0-255
58
syslog_server server_name8
severity
Set Syslog severity.
syslog server severity types
59
syslog_server server_name8
facility
Set Syslog facility.
syslog server facility ID types
10.4 system logging ipv6 configure
S.No
Command Name
Description
Type and Description
1
save
Save ipv6 logging configuration changes.
2
exit
Save ipv6 logging configuration changes and exit current mode.
3
cancel
Roll back ipv6 logging configuration changes.
4
lan_wan_accept_enable
Enable/Disable logging for the LAN to WAN Accept packets
Boolean choice
5
lan_wan_drop_enable
Enable/Disable logging for the LAN to WAN Dropped packets
Boolean choice
6
w an_lan_accept_enable
Enable/Disable logging for the WAN to LAN Accept packets
Boolean choice
7
w an_lan_drop_enable
Enable/Disable logging for the WAN to LAN Dropped packets
Boolean choice
10.5 system remote_management https
configure
S.No
Command
Name
Description
Type and Description
1
save
save access Management changes for https.
2
exit
Save access Management changes for https and exit
current mode.
3
cancel
Roll back Remote Mgmt changes.
4
enable
Enable/disable remote mgmt over https.
Boolean choice
5
type
Enable/disable remote mgmt over https.
Unsigned integer
6
from_address
Set the starting IP in case of range, and the IP to be
allow ed access in case of granting access to a particular
machine
IP address AAA.BBB.CCC.DDD w here
each part is in the range 0-255
7
end_address
Set the Ending IP in case of range.
IP address AAA.BBB.CCC.DDD w here
each part is in the range 0-255
8
port
Set the port you w ant to use for HTTP.
Unsigned integer
9
Status
Enable/disable remote snmp.
Boolean choice