D-Link DSR-1000N - WAN Settings

Unified Services Router CLI Reference Guide
75
9.3 security advanced_network igmp
allowedsubnets add
S.No
Command Name
Description
Type and Description
1
save
Save muticast source subnet
configuration
2
exit
Save igmp configuration changes
and exit current mode.
3
cancel
Roll back igmp configuration
changes.
4
multicast_source_address
Enter the address of the multicast
source
IP address AAA.BBB.CCC.DDD w here each
part is in the range 0-255
5
multicast_source_masklength
Enter the masklength of the multicast
source address
number in range of 1 to 32
9.4 security advanced_network igmp
allowedsubnets edit <ltrow_id>
S.No
Command Name
Description
Type and Description
1
<ltrow_id>
Edit network address and mask
length of multicast source
Unsigned integer
2
save
Save muticast source subnet
configuration
3
exit
Save igmp configuration changes
and exit current mode.
4
cancel
Roll back igmp configuration
changes.
5
multicast_source_address
Enter the address of the multicast
source
IP address AAA.BBB.CCC.DDD w here each
part is in the range 0-255
6
multicast_source_masklength
Enter the masklength of the multicast
source address
number in range of 1 to 32
9.5 security advanced_network igmp
allowedsubnets delete <ltrow_id>
S.No
Command Name
Description
Type and Description
1
<ltrow_id>
delete netw ork address and masklength of multicast source
Unsigned integer
9.6 security advanced_network ips setup
S.No
Command Name
Description
Type and Description
1
save
Save ips configuration changes.
2
exit
Save ips configuration changes and exit current mode.
3
cancel
Roll back ips configuration changes.
4
enable_intrusion_prevention
Enable or Disable Intrusion Prevention.
Boolean choice
5
enable_intrusion_detection
Enable or Disable Intrusion Detection.
Boolean choice
6
ips_check_active
Enable or Disable IPS checks.
7
ips_check_active lan-wan
Enable or Disable ips checks active between LAN and WAN.
Boolean choice