D-Link DSR-1000N - OSPF

Unified Services Router CLI Reference Guide
71
3
exit
Save IPV6 static routes changes and exit
current mode.
4
cancel
Roll back IPV6 route configuration
changes.
5
destination_address
Set the IPV6 destination IP.
IP address
abcd:abcd:abcd:abcd:abcd:
abcd:abcd:abcd where
each part is in the range [0-
9A-Fa-f:]
6
prefix
Set the prefix length for this rule.
Unsigned integer
7
gatew ay_address
Set the gatew ay IPV6.
IP address
abcd:abcd:abcd:abcd:abcd:
abcd:abcd:abcd where
each part is in the range [0-
9A-Fa-f:]
8
interface
Set the interface for which the rule
applies.
select the ipv6 interface
type
9
metric
Set the metric for this route.
Unsigned integer
10
active_flag
Defines w hether its an active IPV6 route
Boolean choice
8.54 net routing static ipv4 delete <ltname>
S.No
Command Name
Description
Type and Description
1
<ltname>
Delete a specific route.
String
8.55 net routing static ipv6 delete <ltname>
S.No
Command Name
Description
Type and Description
1
<ltname>
Delete a specific IPV6 route.
String
8.56 net tahi add-default-route <ltip_address>
S.No
Command Name
Description
Type and Description
1
<ltip_address>
add ipv6 default route on lan interface.
IP address
abcd:abcd:abcd:abcd:abcd:
abcd:abcd:abcd where
each part is in the range [0-
9A-Fa-f:]
8.57 net tahi add-route <ltip_address> <ltgw>
S.No
Command Name
Description
Type and Description
1
<ltip_address> <ltgw>
add ipv6 route on lan interface.
IP address
abcd:abcd:abcd:abcd:abcd:abc
d:abcd:abcd w here each part is
in the range [0-9A-Fa-f:]
IP address
abcd:abcd:abcd:abcd:abcd:abc
d:abcd:abcd w here each part is