D-Link DSR-1000N - Protocol Binding

Unified Services Router CLI Reference Guide
73
8.63 net tahi reachable-time <lttime>
S.No
Command Name
Description
Type and Description
1
<lttime>
set the reachable time of
neighbour cache entries
number in range of 30 to 150
8.64 net tahi ping6 <ltip> <ltsize>
S.No
Command Name
Description
Type and Description
1
<ltip> <ltsize>
ping6 on LAN interface
w ith count one
IP address
abcd:abcd:abcd:abcd:abcd:abcd:abcd:abcd
w here each part is in the range [0-9A-Fa-f:]
number in range of 1 to 1500
8.65 net tahi mping6 <ltmip>
S.No
Command Name
Description
Type and Description
1
<ltmip>
multicast ping6
IP address
abcd:abcd:abcd:abcd:abcd:abcd:abcd:abcd
w here each part is in the range [0-9A-Fa-f:]
8.66 net tahi pmtu-route-add <ltipAdd>
S.No
Command Name
Description
Type and Description
1
<ltipAdd>
add ipv6 route on lan
interface.
IP address
abcd:abcd:abcd:abcd:abcd:abcd:abcd:abcd
w here each part is in the range [0-9A-Fa-f:]
8.67 net upnp configure
S.No
Command Name
Description
Type and Description
1
save
Save upnp configuration
changes.
2
cancel
Roll back upnp
configuration changes.
3
exit
Save upnp configuration
changes and current mode.
4
enable
Enable/Disable UPNP
Boolean choice
5
Interface
Select the interface from
LAN/VLAN
String
6
advertisement
Set upnp advertisement
parameters
7
advertisement period
Set Advertisement Period
(in seconds)
UPnP Advertisement Period Type.
8
advertisement time_to_live
Set Advertisement Time To
Live (in seconds)
UPnP Advertisement Time To Live Type.