D-Link DSR-1000N - Net Lan Ipv6 Pool Delete <Ltipv6 Poolstartaddr; Net Intel_Amt Server Configure; Net Intel_Amt_Reflector Configure

Unified Services Router CLI Reference Guide
37
abcd:abcd:abcd:abcd:abcd:abcd:abc
d:abcd w here each part is in the
range [0-9A-Fa-f:]
7
prefix_value
Prefix length
Unsigned integer
8.19 net lan ipv6 pool delete
<ltipv6PoolStartAddr>
S.No
Command Name
Description
Type and Description
1
<ltipv6PoolStartAddr>
IPv6 LAN configuration delete.
IP address
abcd:abcd:abcd:abcd:abcd:abcd:abc
d:abcd w here each part is in the
range [0-9A-Fa-f:]
8.20 net intel_Amt server configure
S.No
Command Name
Description
Type and Description
1
save
Save InterlAmt server configuration changes.
2
cancel
Roll back IntelAmt server configuration
changes.
3
exit
Save IntelAmt server configuration changes
and exit current mode.
4
enable_Intel_Amt
enable/disable Intel Amt Ports.
Boolean choice
5
Wan_hosts
IntelAmt Wan Host Type.
Intel Amt Wan Host type
6
Wan_host_Address
IntelAmt Wan Host Address
String
7
Internal_Address
IntelAmt intenal Address
IP address AAA.BBB.CCC.DDD
w here each part is in the range 0-255
8.21 net intel_Amt_Reflector configure
S.No
Command Name
Description
Type and Description
1
save
Save InterlAmt Reflector configuration
changes.
2
cancel
Roll back IntelAmt server configuration
changes.
3
exit
Save IntelAmt server configuration
changes and exit current mode.
4
enable
enable intelAmt reflectors on port
5
enable Intel_Amt_Reflector
enable/disable Ports.
Boolean choice
6
enable
Intel_Amt_Reflector_destport
enable intelamt reflectors on different ports
7
enable
Intel_Amt_Reflector_destport
16992
enable/disable Ports.
Boolean choice
8
enable
Intel_Amt_Reflector_destport
16993
enable/disable Ports.
Boolean choice
9
enable
Intel_Amt_Reflector_destport
16994
enable/disable Ports.
Boolean choice