D-Link DSR-1000N - #3 Configure DHCP Server

Unified Services Router CLI Reference Guide
18
Chapter 6. Utility commands used in
CLI
The command util ? at the CLI prompt would give the description of all the utility commands in
the branch util, which is as follows :
Sl No
Command Name
Pur pose
1
util ping
Ping or Trace an IP Address.
2
util restore_factory_defaults
Revert to factory default settings.
3
util reboot
Reboot the system
6.1 util system_check ping <ltip_address>
S.No
Command Name
Description
Type and Description
1
<ltip_address>
Ping an Internet Address.
String
6.2 util system_check dns_lookup <ltdns>
S.No
Command
Name
Description
Type and
Description
1
<ltdns>
To retrieve the IP address of a Web, FTP, Mail or any other Server on the
Internet
String
6.3 util system_check traceroute
<ltip_address>
S.No
Command
Name
Description
Type and
Description
1
<ltip_address>
display all the routers present between the destination IP address and this
router
String
6.4 util system_check capturePackets start
<ltinterface>
S.No
Command Name
Description
Type and Description
1
<ltinterface>
Start the packet capture
WAN interface type
6.5 util system_check capturePackets
download <ltfileName> <ltipAddr>
S.No
Command Name
Description
Type and Description
1
<ltfileName>
<ltipAddr>
Dow nload the packet capture to the
host machine
String
IP address AAA.BBB.CCC.DDD w here each part is in
the range 0-255