EasyManua.ls Logo

D-Link DSR-1000N - Page 24

D-Link DSR-1000N
129 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Unified Services Router CLI Reference Guide
22
<ltportName>
86
net w an pppoe
PPPOE client configuration mode
87
net w an pppoe configure
PPPOE client configuration mode
88
net routing protocol_binding
protocol_binding rules
89
net routing protocol_binding add
protocol_binding rules configuration mode.
90
net routing protocol_binding edit <ltrow_id>
protocol_binding rules configuration mode.
91
net routing protocol_binding enable
<ltrow _id>
protocol_binding rules configuration mode.
92
net routing protocol_binding disable
<ltrow _id>
protocol_binding rules configuration mode.
93
net routing protocol_binding delete
<ltrow _id>
protocol_binding rules configuration mode.
94
net radvd
RADVD configuration setup.
95
net radvd pool
RADVD configuration setup.
96
net radvd configure
radvd configuration mode.
97
net radvd pool add
radvd Pool configuration mode.
98
net radvd pool edit <ltrow_id>
radvd Pool configuration mode.
99
net radvd pool delete <ltrow_id>
radvd pool configuration mode.
100
net routing dynamic
Configure the routes dynamically.
101
net routing dynamic configure
configure the routes dynamically.
102
net routing
configure routing mode, static and dynamic route(s).
103
net routing static
Configure the routes.
104
net routing static ipv4
Configure the routes.
105
net routing static ipv6
Configure the IPV6 routes.
106
net routing static ipv4 configure <ltname>
Add new static routes.
107
net routing static ipv6 configure <ltname>
Add new IPV6 static routes.
108
net routing static ipv4 delete <ltname>
Delete a specific route.
109
net routing static ipv6 delete <ltname>
Delete a specific IPV6 route.
110
net routing static ipv4 deleteAll
Delete all the configured routes.
111
net routing static ipv6 deleteAll
Delete all the configured IPV6 routes.
112
net tahi
settings for tahi test suite.
113
net tahi add-default-route <ltip_address>
add ipv6 default route on lan interface.
114
net tahi delete-default-route
delete ipv6 default route on lan interface.
115
net tahi add-route <ltip_address> <ltgw>
add ipv6 route on lan interface.
116
net tahi del-route <ltip_address> <ltgw>
add ipv6 route on lan interface.
117
net tahi stop-RA
stop sending RA.
118
net tahi start-RA-AdvRetransTimer(1000)
start sending RA with AdvRetransTimer as 1000.
119
net tahi start-RA-AdvRetransTimer(5000)
start sending RA with AdvRetransTimer as 5000.
120
net tahi startRA-
Reachable(30000)Retrans(1000)
start sending RA with AdvReachableTime as 30000
and AdvRetransTimer as 1000.
121
net tahi start-RA-AdvReachableTime(10000)
start sending RA with AdvReachableTime as 10000.
122
net tahi start-RA-AdvReachableTime(30000)
start sending RA with AdvReachableTime as 30000.
123
net tahi start-RA(Default)
start sending RA with default parameters.
124
net tahi start-RA-MinValues
start sending RA with minimum values of parameters.
125
net tahi start-RA-MaxValues
start sending RA with maximum values of
parameters.
126
net tahi start-RA-MaxRtrAdvInterval(10)
start sending RA with MaxRtrAdvInterval value of 10.
127
net tahi start-RA-MaxRtrAdvInterval(40)
start sending RA with MaxRtrAdvInterval value of 40.
128
net tahi start-RA-MinRtrAdvInterval(198)
start sending RA with MinRtrAdvInterval value of
198.
129
net tahi start-RA-prefix(8000::)
start sending RA with prefix 8000::/64.
130
net tahi start-RA-prefix(fec0::)
start sending RA with prefix fec0::/64.
131
net tahi start-RA-AdvCurHopLimit(0)
start sending RA with AdvCurHopLimit value as 0.
132
net tahi start-RA-AdvCurHopLimit(15)
start sending RA with AdvCurHopLimit value as 15.
133
net tahi start-RA-WAN
start sending RA on the WAN interface.
134
net tahi ipv6-down
disable the ipv6 stack on the router.

Table of Contents

Other manuals for D-Link DSR-1000N

Related product manuals