D-Link DSR-250 - Chapter 3. Connecting to the Internet: WAN Setup

Unified Services Router CLI Reference Guide
26
Sl No
Command Name
Description
Type and Description
13
save
Save LAN configuration changes
8.16 net lan ipv6 pool configure
<start_address>
Sl No
Command Name
Description
Type and Description
1
start_address
Set dhcpv6 start IP address.
IP address
abcd:abcd:abcd:abcd:abcd:abcd:a
bcd:abcd where each part is in the
range
2
end_address
Set dhcpv6 end IP address.
IP address
abcd:abcd:abcd:abcd:abcd:abcd:a
bcd:abcd where each part is in the
range
3
prefix
Set dhcpv6 prefix length.
Unsigned integer,
Prefix length
4
cancel
Roll back ipv6 pool configuration
changes
5
exit
Save ipv6 pool configuration changes
and exit current mode
6
save
Save ipv6 pool configuration changes
8.17 net lan ipv6 pool delete <start_address>
Sl No
Command Name
Description
Type and Description
1
start_address
Set dhcpv6 start IP address.
IP address
abcd:abcd:abcd:abcd:abcd:abcd:a
bcd:abcd where each part is in the
range
8.18 net mode configure
Sl No
Command Name
Description
Type and Description
1
ip_type
Select IPv4 only or IPv4/IPv6 mode.
Ip mode type,
IPv4 only or IPv4 and IPv6.
2
cancel
Roll back mode configuration changes
3
exit
Save mode configuration changes and
exit current mode
4
save
Save mode configuration changes