Unified Services Router CLI Reference Guide
34
8.31 net wan configurable_port configure
Select the configurable port type
Select from the wan2 or dmz
8.32 net wan wan1 ipv4 configure
This command allows you to set the
MAC address.
MAC Address,
Its format is XX:XX:XX:XX:XX:XX
where X is a number from 0 to 9
(inclusive) or an alphabetical letter
between A and F (inclusive).
The default is set to Use Default
Address. If your ISP requires MAC
authentication and another MAC
address has been previously registered
with your ISP, then select either Use
this computer's MAC address or select
Use This MAC Address and manually
enter in the MAC address expected by
your ISP.
Types of mac address source,
Use-Default-Mac/Use-This-
Computers-Mac/Use-This-Mac
String,setting Dhcp hostname
Enter Yes to get dns dynamically from
ISP otherwise Enter No and give valid
static dns addresses
Boolean Choice (Y/N),
Enter Yes to get dns dynamically
from ISP otherwise Enter No and
give valid static dns addresses
Valid primary DNS Server IP Address
Valid secondary DNS Server IP
Address
IP address,
Secondary dns
Select this option if your connection
type is one of PPPoE, PPTP or L2TP
Boolean Choice (Y/N),
Set Y if your connection type is
once of PPPoE, PPTP or L2TP
otherwise N.
Select among the options: STATIC,
DHCPC, PPPoE, PPTP, or L2TP
ISP Types.
STATIC/DHCPC/PPPOE/PPTP/L2
TP
ISP Connectivity Types.
keepalive/idletimeout
idle timeout value type. Valid range
is 5 to 999
IP address assigned by the ISP to
make a connection with the ISP server
IP address AAA.BBB.CCC.DDD
where each part is in the range 0-
255
Enter the password to log in.
String, Alphanumeric password
Enter the secret phrase to log into the
server
String,
Alphanumeric server secret phrase
IP address of the L2TP server
IP address AAA.BBB.CCC.DDD