D-Link DSR-250 - Net Radvd Pool Add;Edit; Net Radvd Pool Delete <Row_Id; Net Routing Dynamic Configure

Unified Services Router CLI Reference Guide
28
Sl No
Command Name
Description
Type and Description
8
cancel
Roll back radvd configuration changes
9
exit
Save radvd configuration changes and
exit current mode
10
Save
Save radvd configuration changes
8.21 net radvd pool add/edit
Sl No
Command Name
Description
Type and Description
1
prefix_address
It specifies the IPv6 network address
prefix address,
abcd:abcd:abcd:abcd:abcd:abcd:a
bcd:abcd where each part is in the
range [0-9A-Fa-f:]
2
prefix_length
The prefix length variable is a decimal
value that indicates the number of
contiguous, higher order bits of the
address that make up the network
portion of the address
Integer,
Prefix length
3
prefix_life_time
The length of time over which the
requesting router is allowed to use the
prefix
Integer,
Life time value
4
prefix_type
Option whether to select the prefix type
as 6to4 or Global/Local/ISATAP
IPv6 prefix type,
6To4/Global/Local/ISATAP
5
sla_id
The SLA ID (Site-Level Aggregation
Identifier) in the 6to4 address prefix is
set to the interface ID of the interface
on which the advertisements are sent
Integer,
Site-Level Aggregation Identifier
6
cancel
Roll back mode configuration changes
7
exit
Save mode configuration changes and
exit current mode
8
save
Save mode configuration changes
8.22 net radvd pool delete <row_id>
Sl No
Command Name
Description
Type and Description
1
row_id
Row Id of the multihoming entry to be
deleted
Unsigned integer
Row id number
8.23 net routing dynamic configure
Sl No
Command Name
Description
Type and Description
1
authentication_enable
Enable/Disable Authentication for RIP-
2B/2M
Boolean Choice (Y/N)
Authentication status for RIP-
2B/2M
2
direction
rip direction None, In only, Out only,
Both.
Rip direction type,
None/In-only/Out-only/Both
3
ripng_enable
Enable/Disable the RIPNG functionality
Boolean Choice (Y/N)