D-Link DSR-250 - Security Firewall Ipv4 Disable <Row_Id; Security Firewall Ipv4 Enable; Security Ids Configure; Security Ip_Or_Mac_Binding Add;Edit

Unified Services Router CLI Reference Guide
49
Sl No
Command Name
Description
Type and Description
<row_id>
Row Id Of the rule to be deleted
9.12 security firewall ipv4 disable <row_id>
Sl No
Command Name
Description
Type and Description
1
security firewall ipv4 disable
<row_id>
Row Id Of the rule to be disabled
Integer,
Row Id Of the rule to be disabled
9.13 security firewall ipv4 enable
Sl No
Command Name
Description
Type and Description
1
security firewall ipv4 enable
<row_id>
Row Id Of the rule to be enabled
Integer,
Row Id Of the rule to be enabled
9.14 security ids configure
Sl No
Command Name
Description
Type and Description
1
enable <idsStatus>
Enable Intrusion detection system
Boolean choice (Y/N),
Enable/Disable Intrusion detection
system
2
intrusion_log_enable
<intrusionLogStatus>
Enable/Disable intrusion logs
Boolean choice (Y/N),
Enable/Disable intrusion logs
3
save
Save IDS configuration changes.
4
exit
Save IDS configuration changes and
exit current mode.
5
cancel
Roll back IDS configuration changes.
9.15 security ip_or_mac_binding add/edit
Sl No
Command Name
Description
Type and Description
1
ip_address <ipAddr>
configure ip address to which policies
will be applied
IP address AAA.BBB.CCC.DDD
where each part is in the range 0-
255
2
log_dropped_packets
<logStat>
Specify logging option for this rule
Boolean choice (Y/N),
logging option for this rule
3
mac_address <macAddr>
enter mac address to which policies
will be applied
MAC address
AA:BB:CC:DD:EE:FF where each
part is in the range 00-FF
4
name <name>
Specify a unique name for this rule.
name String
5
exit
Save ip mac binding configuration
changes and exit current mode.
6
save
Save ip mac binding configuration
changes.
7
cancel
Roll back ip mac binding configuration