D-Link DSR-250 - 4.3 Creating and Using Access Points

Unified Services Router CLI Reference Guide
57
10.4 system radius configure <radiusServer>
Sl No
Command Name
Description
Type and Description
1
server <ip_address>
Set RADIUS server IP address.
Radius server IP address
AAA.BBB.CCC.DDD where each
part is in the range 0-255
2
authentication_port <port>
Set RADIUS server port.
RADIUS server port. (0..65535)
3
secret <secret>
Set RADIUS server secret.
RADIUS server secret string.
4
timeout <timeout>
Set RADIUS server connection
timeout.
RADIUS server connection timeout
(in seconds).
5
retries <retries>
Set RADIUS server connection retry
attempts.
Integer,
RADIUS server connection retry
attempts.
6
cancel
Roll back configuration changes
7
save
Save RADIUS configuration changes.
8
exit
Save RADIUS configuration changes
and exit current mode.
10.5 system radius delete <radiusServer>
Sl No
Command Name
Description
Type and Description
1
radiusServer
IP address of RADIUS
server to configure.
Radius server IP address
AAA.BBB.CCC.DDD where each
part is in the range 0-255
10.6 system remote_management https
configure
Sl No
Command Name
Description
Type and Description
1
enable <https_enable>
Enable/disable remote mgmt over
https.
Enable/ Disable flag. (Y/N)
2
from_address <access_ip1>
Set the starting IP in case of range,
and the IP to be allowed access in case
of granting access to a particular
machine
IP address.
3
end_address <access_ip2>
Set the Ending IP in case of range.
IP address
4
port <port>
Set the port you want to use for HTTP.
Integer,
Port number
5
type <access_type>
Access type
0 -Enable access to all, 1 - Enable
access to a range of IPs, 2 -
Enable access to a single IP.
6
enable <https_enable>
Enable/disable remote mgmt over
https.
Enable/ Disable flag. (Y/N)
7
save
save access Management changes for
https.