D-Link DSR-250 - Chapter 12. Configuration Commands under Branch VPN; Vpn Ipsec Policy Connect <Row_Id; Vpn Ipsec Policy Drop <Row_Id; Vpn Ipsec Policy Delete <Name

Unified Services Router CLI Reference Guide
68
Chapter 12. Configuration commands
under branch VPN
12.1 vpn ipsec policy connect <row_id>
Sl No
Command Name
Description
Type and Description
1
row_id
rowid of vpn policy to connect and
establish an inactive SA (connection).
Unsigned integer, row_id of vpn
policy
12.2 vpn ipsec policy drop <row_id>
Sl No
Command Name
Description
Type and Description
1
row_id
rowid of vpn policy to disconnect and
terminate an active SA (connection)
Unsigned integer, row_id of vpn
policy
12.3 vpn ipsec policy delete <name>
Sl No
Command Name
Description
Type and Description
1
Name
Unique ike policy name
String,
Ike policy name
12.4 vpn ipsec policy configure <name>
Sl No
Command Name
Description
Type and Description
1
name
Unique vpn policy name
String,
vpn policy name
2
general_policy_ty
pe
For manual policy All settings
(including the keys) for the VPN tunnel
are manually input for each end point.
No third-party server or organization is
involved.
for auto policy Some parameters for
the VPN tunnel are generated
automatically. This requires using the
IKE (Internet Key Exchange) protocol to
perform negotiations between the two
VPN Endpoi
Vpn PolicyType(Manual Policy/
Auto Policy)
3
general_ike_versi
on
Select the ike version
Vpn ikeversion(IKEV1 /IKEV2)
4
general_ipsec_mod
e
This can be either 'Tunnel' mode or
'Transport' modeTransmode is used
when we want to secure
communication only between two
gateways
IPSecMode(Tunnel /Transport)