D-Link DSR-250 - Net Routing Mode Configure; Net Routing Static Ipv4 Configure <Name

Unified Services Router CLI Reference Guide
30
Sl No
Command Name
Description
Type and Description
25
second_key valid_from
second
second in which md5 authentication key
validity starts
Second in the format SS(00-59)
26
second_key valid_from year
year in which md5 authentication key
validity starts
Year , valid range is 1970 to 2037
27
second_key valid_to day
day in which md5 authentication key
validity ends
Day in the format DD(01-31)
28
second_key valid_to hour
hour in which md5 authentication key
validity ends
HH(00-23) using 24 hour clock
29
second_key valid_to minute
minute in which md5 authentication key
validity ends
minute in the format MM(00-59)
30
second_key valid_to month
month in which md5 authentication key
validity ends
Month in the format MM(01-12)
31
second_key valid_to second
second in which md5 authentication key
validity ends
Second in the format SS(00-59)
32
second_key valid_to year
year in which md5 authentication key
validity ends
Year , valid range is 1970 to 2037
33
cancel
Roll back rip configuration changes.
34
exit
Save dynamic routes changes and exit
current mode.
35
save
Save dynamic route changes.
8.24 net routing mode configure
Sl No
Command Name
Description
Type and Description
1
cancel
Roll back routing mode configuration
changes.
2
exit
Save routing mode configuration
changes and exit current mode.
3
save
Save routing mode configuration
changes.
4
type
Select NAT or Classical Routing mode.
Routing mode type,
NAT / Classical routing
8.25 net routing static ipv4 configure <name>
Sl No
Command Name
Description
Type and Description
1
name
Unique route name
String,
Route name
2
active_flag
Defines whether its an active route
Boolean choice (Y/N),
Set/unset the active flag
3
destination_address
Set the destination IP.
IP Address,
Destination address
4
gateway_address
Set the gateway ip address
IP Address,
Gateway address