D-Link DSR-250 - System Time Configure

Unified Services Router CLI Reference Guide
60
Sl No
Command Name
Description
Type and Description
changes and exit current mode.
10.11 system time configure
Sl No
Command Name
Description
Type and Description
1
auto_daylight <auto_daylight>
Specify whether system automatically
adjusts for daylight savings time
Boolean (Y/N)
Specify whether system
automatically adjusts for daylight
savings time
2
ntp_server1 <ntp_server>
Set NTP server#1
String
Server 1 Name / IP Address
3
ntp_server2 <ntp_server>
Set NTP server#2
String
Server 2 Name / IP Address
4
timezone <tz>
Timezone
string
Timezone (see note for values)
5
use_default_servers
<enable>
Specify whether to use system default
NTP servers
Boolean (Y/N)
Enable/Disable use of default NTP
servers
6
cancel
Roll back time configuration changes.
7
exit
Save time configuration changes and
exit current mode.
8
save
Save time configuration changes.
Note:
GMT :: Greenwich-Mean-Time-Edinburgh—London
GMT-12:00 :: Eniwetok-Kwajalein
GMT-11:00 :: Midway-Island-Samoa
GMT-10:00 :: Hawaii
GMT-09:30 :: Marqesas-Is.
GMT-09:00 :: Alaska
GMT-08:30 :: Pitciarn-Is.
GMT-08:00 :: Pacific-TimeCanada :: -Tijuana
GMT-08:00 :: Pacific-TimeUS :: Tijuana
GMT-07:00 :: Mountain-Time—ArizonaCanada
GMT-07:00 :: Mountain-Time—ArizonaUS
GMT-06:00 :: Mexico-CityUS—Canada
GMT-06:00 :: CentralTimeUSA
GMT-05:00 :: EasternTime
GMT-05:00 :: EasternTimeUSA :: Lima-Indiana-East
GMT-04:00 :: Atlantic-TimeCanada :: -Caracas
GMT-03:30 :: Newfoundland
GMT-03:00 :: Brasilia--Buenos-Aires
GMT-02:00 :: Mid-Atlantic
GMT-01:00 :: Azores--Cape-Verde-Is.
GMT+01:00 :: Europe