D-Link DSR-250 - 3.7 WAN 3 (3 G) Configuration

Unified Services Router CLI Reference Guide
47
Sl No
Command Name
Description
Type and Description
3
name
Name of the service for which a rule is
to be added
String,
Service name
4
protocol
Protocol type
Protocol type
(TCP/UDP/ICMP/ICMPv6)
5
quality_of_service
Type of QoS
QoS. (Normal-Service/Minimize-
Cost/Maximize-
Reliability/Maximize-
Throughput/Minimize-Delay)
6
cancel
Roll back custom services configuration
changes.
7
exit
Save custom services configuration
changes and exit current mode.
8
save
Save custom services configuration
changes.
9.8 security custom_service delete <row_id>
Sl No
Command Name
Description
Type and Description
1
security custom_service
delete <row_id>
Delete custom service row
Row Id Of the service to be deleted
9.9 security firewall ipv4
default_outbound_policy
Sl No
Command Name
Description
Type and Description
1
security firewall ipv4
default_outbound_policy_ena
ble
<default_outbound_policy>
Configure default outbound policy
enable/disable default ob policy
(Y/N)
9.10 security firewall ipv4 configure/edit
Sl No
Command Name
Description
Type and Description
1
action <action>
Action to be taken by the rule
BLOCK_ALWAYS/ALLOW_ALWA
YS/BLOCK_BY_SCHEDULE_ELS
E_ALLOW/ALLOW_BY_SCHEDUL
E_ELSE
_BLOCK,
Type of Action to be taken by the
rule
2
destination_address_end
<dstAddrEnd>
End IP of the Destination user
IP Address
End IP of the Destination User
3
destination_address_start
<dstAddrStart>
Start IP of the Destination user
IP Address
Start IP of the Destination user
4
destination_address_type
<dstType>
Type of the destination user
Type of destination address,
Any/Single Address/Address
Range