D-Link DSR-250 - 4.2.2 WPA or WPA2 with PSK

Unified Services Router CLI Reference Guide
55
Chapter 10. Configuration commands
under branch SYSTEM
10.1 system logging facility configure <facility>
Sl No
Command Name
Description
Type and Description
1
system logging facility
configure <facility>
Facility type to configure.
Facility types,
Kernel/System/Local0-
Wireless/Local1-UTM
2
level_options_set <level>
<level_options> <enable>
Set level options. This command can
be
Level identifier types,
Emergency/Alert/Critical/Error/War
ning/Notification/Information/Debug
ging
Logging level options,
Display_In_Event_Log/Send_to_sy
slog
Enable, Enable/Disable this logging
option. (Y/N)
10.2 system logging ipv4 configure
Sl No
Command Name
Description
Type and Description
1
bandwidth_limit_logs
<bandwidthLimitLogs>
Bandwidth Limit logs Enable/Disable
Boolean Choice (Y/N)
2
broadcast_or_multicast_traffic
_logs
<broadcastOrMulticastTraffic
>
All Broadcast/Multicast Traffic logs
Enable/Disable
Boolean Choice (Y/N)
3
lan_wan_accept_packet_logs
<acceptedPkts>
lan to wan accepted Pkts
Enable/Disable
Boolean Choice (Y/N)
4
lan_wan_drop_packet_logs
<droppedPkts>
lan to wan dropped Pkts
Enable/Disable
Boolean Choice (Y/N)
5
source_mac_filter_logs
<sourceMacFilter>
Source mac filter logs Enable/Disable
Boolean Choice (Y/N)
6
unicast_traffic_logs
<unicastTrafficPkts>
All Unicast Traffic logs Enable/Disable
Boolean Choice (Y/N)
7
wan_lan_accept_packet_logs
<acceptedPkts>
wan to lan accepted Pkts logs
Enable/Disable
Boolean Choice (Y/N)
8
wan_lan_drop_packet_logs
<droppedPkts>
wan to lan dropped Pkts logs
Enable/Disable
Boolean Choice (Y/N)
9
cancel
Roll back logging configuration
changes.
10
save
Save logging configuration changes.
11
exit
Save logging configuration changes
and exit current mode.