D-Link N300 - Page 121

DIR-620S Wireless N300 Router with 3G/LTE Support and
USB Port
User Manual
Configuring via Web-based Interface
In the Basic Settings section, the following parameters are available:
Parameter Description
Enable Wireless
To enable Wi-Fi connection, move the switch to the right.
To disable Wi-Fi connection, move the switch to the left.
To enable/disable Wi-Fi connection on a schedule, click the Set
schedule button ( ). In the opened window, you can create a
new schedule (see the Schedule section, page 217) or use the
existing one. Existing schedules are displayed in the Interval of
execution drop-down list in the simplified mode.
To enable Wi-Fi connection at the time specified in the schedule and
disable it at the other time, select the Enable wireless
connection value from the Action drop-down list and click the
SAVE button.
To disable Wi-Fi connection at the time specified in the schedule and
enable it at the other time, select the Disable wireless
connection value from the Action drop-down list and click the
SAVE button.
To change or delete the schedule, click the Edit schedule button
( ). In the opened window, change the parameters and click the
SAVE button or click the DELETE FROM SCHEDULE button.
Country
The country you are in. Select a value from the drop-down list.
Wireless mode
Operating mode of the wireless network of the router. This
parameter defines standards of the devices that will be able to use
your wireless network. Select a value from the drop-down list.
Select channel
automatically
Move the switch to the right to let the router itself choose the
channel with the least interference.
Enable additional
channels
If the switch is moved to the left, the device automatically selects
one of available standard channels. To use additional channels (the
12th and 13th), move the switch to the right.
Channel
The wireless channel number.
To select a channel manually, left-click; in the opened window,
select a channel and click the SAVE button. The action is available,
when the Select channel automatically switch is moved to the
left.
Enable periodic
scanning
Move the switch to the right to let the router search for a free
channel in certain periods of time. When the switch is moved to the
right, the Scanning period field is available for editing.
Page 121 of 238