D-Link N300 User Manual

DIR-620S Wireless N300 Router with 3G/LTE Support and
USB Port
User Manual
Configuring via Web-based Interface
DLNA
On the USB Storage / DLNA page, you can enable the built-in DLNA server of the router to
provide access to the USB storage for users of your LAN.
The built-in media server allows DLNA certified devices of your LAN to play multimedia content
of the USB storage. Multimedia content can be played only when a USB storage is connected to the
router.
Figure 122. The USB Storage / DLNA page.
To enable the DLNA server, move the Enable switch to the right.
In the Update interval field, specify the time period (in seconds), at the end of which the media
server updates the file list of the USB storage, or leave the value specified by default (900).
In the DLNA server name field, specify a name of the DLNA server which will be displayed for
users of your LAN or leave the value specified by default (D-Link DLNA Server). Use digits
and/or Latin characters.
To allow access to the content of the USB storage for users of your LAN, click the ADD ( )
button in the Media Folders section.
Page 154 of 236

D-Link N300 Specifications

General

Wireless Speed	300 Mbps
Frequency Band	2.4 GHz
Wireless Standards	IEEE 802.11n/g/b
Antenna Type	Internal
Ports	1 x 10/100 Mbps Ethernet Port
Security	WPA, WPA2
Product Type	Range Extender