D-Link N300 - Ipsec

DIR-620S Wireless N300 Router with 3G/LTE Support and
USB Port
User Manual
Configuring via Web-based Interface
Parameter Description
Inform Settings
On
Move the switch to the right so the router may send reports (data on
the device and network statistics) to the ACS.
Interval
Specify the time period (in seconds) between sending reports.
Auto Configuration Server Settings
Get URL address via
DHCP
If the switch is moved to the right, the router obtains the URL
address of the ACS upon establishing the Dynamic IP type
connection.
If you need to specify the URL address manually, move the switch
to the left and enter the needed value in the URL address field.
URL address
The URL address of the ACS provided by the ISP.
Username
The username to connect to the ACS.
Password
The password to connect to the ACS.
Connection Request Settings
Username
The username used by the ACS to transfer a connection request to
the router.
Password
The password used by the ACS.
Request port
The port used by the ACS. By default, the port 8999 is specified.
Request path
The path used by the ACS.
When you have configured the parameters, click the APPLY button.
Page 188 of 238